Hook for Ego 56V leaf blower

I designed these hooks for 56V EGO leaf blowers to keep the blower safely off the ground with the nozzle pointed down.  Choose the hook appropriate for your model.  These hooks have been tested with these models:

• 480 CFM
• 530/575/580 CFM
• 585/615/650 CFM
• 765 CFM

Each hook inserts into the unique opening in the foot on the bottom of the leaf blower to hold it in a secure vertical position.

Each hook is 3D printed (FDM) using durable PET-G (polyethylene terephthalate glycol, a.k.a. polyester).

I recommend securing the hook with at least one screw into a wall stud or other wood backing to handle the stress of repeated loading/unloading of the blower. Use both screw holes. Plastic anchors alone may tear out of drywall.

Recommended temperature range: 15F-125F or -10C-52C (extreme temperatures may cause hook to sag)

Disclaimers:
Do not over tighten screws. Incorrect installation of hook may cause damage to wall and/or equipment. Not responsible for damage caused by improper installation.

Fixtures may vary slightly in color from pictures depending on available source materials.

Leaf blower not included.

Frequently Asked Questions

What size screw should I use?

I used a #8-1 1/2 inch round head screw for my photos, but you should be able to use a countersink style screw as long as you do not over tighten.

When will you have more of the color I want?

I regularly print more racks. Message me with the quantity you are looking for and I can usually print them within a week, assuming I have the materials in stock. I will let you know if there will be delays.

Can you make this in a custom color?

Yes. If I have the color in stock I can usually make the racks within a week, depending on my backlog of orders. Special order colors may require a minimum quantity in order to stock the color, and it can take 1-2 weeks to get a new color.