Hook for EGO 56V Snow Broom Attachment

I designed this Snow Broom hook to get my 56V EGO Snow Broom attachment off the floor. The broom will hang with the brushes facing down so they can drip dry after use.

This Snow Broom rack is 3D printed (FDM) using durable PET-G (polyethylene terephthalate glycol, a.k.a. polyester).

I recommend securing the hook with at least one screw into a wall stud or other wood backing to handle the stress of repeated loading/unloading of the attachment. Use all four screw holes. Plastic anchors alone may tear out of drywall.

Recommended temperature range: 15F-125F or -10C-52C (extreme temperatures may cause rack to sag)

Disclaimers

Do not over tighten screws. Incorrect installation of rack may cause damage to wall and/or equipment. Not responsible for damage caused by improper installation.

Snow Broom not included.

Ships via USPS.

Frequently Asked Questions (FAQ)

What size screw should I use?
I used a #8-1 1/2 inch round head screw for my photos, but you should be able to use a countersink style screw as long as you do not over tighten.

When will you have more of the color I want?
I regularly print more racks. Message me with the quantity you are looking for and I can usually print them within a week, assuming I have the materials in stock. I will let you know if there will be delays.

Are all the green parts the same color?
I do my best to make sure all items ordered together are the same color. The plastic filament I get from my vendor can vary a bit between orders, so I cannot guarantee the color will be exactly the same for items ordered at separate times.

Do you use EGO green?
There is presently not an available source to exactly match EGO green. Green versions of my products will use lime green.

Can you make this in a custom color?
Yes. If I have the color in stock I can usually make the racks within a week, depending on my backlog of orders. Special order colors may require a minimum quantity in order to stock the color, and it can take 1-2 weeks to get a new color.